鞏義市国产大乳喷奶水无码下一篇电影冶金設備有限公司
電  話:0371-64373979
傳  真:0371-64373979
手  機:13783489560
聯係人:王先生
地  址:河南省鞏義市永安路北段
WX-6BF喂線機(喂絲機)

WX-6BF喂線機(喂絲機)

    該設備是一個雙流喂絲機,能夠同時將兩卷相同或不同的絲線喂入鋼包中。喂絲機裝備有雙套夾送輥及中間導輥支撐。通過上輥借助於一個氣缸施加壓力。底輥由電機直接驅動。上輥驅動一個編碼器來精確地測量出喂入芯線的長充。在控製台上的轉換開關允許操作者選擇兩流同時或相繼運行。喂絲速度由控製器來確定,並且將顯示在控製台上。該裝置監視每流所喂入的長度。達到預先選定的長度則喂絲機自動停止。為了便於安裝/拆卸包芯線,該喂絲機具有前進/後退的移動能力。
設備型式:固定、行走、旋轉等三種。
設備種類:單線、雙線、四線等三種。
設備配置:高端(S7--300)、中端(S7--200)、低端(繼電器),三種型式。
The device is a double current wire feeder that can feed two same or different rolls of wire into the ladle at the same time.
The wire feeder device owns double sets of pinch roll and middle guide roll to support,by the upper roll with a cylinder to exert pressure.The lower roll is directly driven by electrical machine.The upper roll accurately measures the length of the feeding core wire by driving a encoder.
The transform switch on the console allows the operator to choose the double current to function at the same time or continuously.
The feeding speed is controlled by the controller,and is shown on the console.The device supervises the feeding length of each current,and it will stop automatically if the length reaches the former setting one.
In order to assemble/disassemble conveniently,the wire feeder has the ability to move forward/backward.
Device pattern:fixed,moving,and rotary
Device category:single wire,double wires,and four wires.
Device assignment:high end(S7--300),middle end(S7--200),low end (relay)

主要技術參數: Main technical parameters:
喂線種類:合金芯線、鋁線、矩形線 Feeding wire category:alloy core wire,aluminum wire,and rectangle wire
喂線根數:2根 Feeding wire number:2
喂線直徑:Ф8--Ф20mm Feeding wire diameter: Ф8--Ф20mm
喂線速度:1--12米/秒 Feeding speed:1--12m/s
主機行走速度:14米/分 Mainframe moving speed:14m/s
導線管角度:30度 Conduit angle:30 degrees
電機密封:IP55 Electrical machine seal:IP55
控製麵板密封:IP54 Control panel seal:IP54
輪距:680mm Tread:680mm
配用功率:主電機7.5KW×2台
Equipped power:Main electrical machin 7.5kw×2
采用電源:380V 三相四線製 Adopted power supply:380v the system of 3phases 4wires
主機外形尺寸:1000×1000×1200(mm)(雙線固定式) Mainframe appearance size: 1000×1000×1200(mm)(doule wires fixed type)
行走鋼軌:11kg/m 輕軌 Moving rail:11kg/m light rail
操作模式:采用PLC控製,可實現機旁、全自動及遠程操作 Operation pattern:PLC is adopted to control.Operation near the machine,completely automatic control and control is realized.
【上一篇:球化孕育處理站】       【下一篇:WF-6DT雙流喂線機(喂絲機)